Sistem - Flash Chromatography

Semua dalam satu solusi untuk aplikasi apapun
dengan kapabilitas scale up.

Sepacore Flash Systems X10 dan X50 adalah sistem yang sepenuhnya otomatis dengan fungsi sebagai berikut:

1. Sepacore Flash System X10

Binary gradient sampai 250ml/menit pada tekanan maksimal 10bar / 145psi
Injection valve
Deteksi UV-Vis, simultan 4 panjang gelombang
Koleksi fraksi dengan multiwavelength peak detection
Kontrol software
Set kartrid silica Sepacore Flash

2. Sepacore Flash System X50

Binary gradient sampai dengan 250ml/menit pada tekanan maksimal 50bar / 725psi
Injection valve
Deteksi UV-Vis, simultan 4 panjang gelombang
Koleksi fraksi dengan multiwavelength peak detection
Kontrol software
Set kartrid silica Sepacore Flash

tampilkan keranjang

1-2 of 2

11058270

Sepacore Flash System X10

System for fully automated binary gradient flash chromatography at a pressure up to 10 bar / 145 psi. Includes:

- 2 x C-601 Pump Modules: flow rate up to 250 ml/min at max. 10 bar (145 psi)
- Control Unit C-620 in SepacoreControl Package: allows complete system control and data handling
o User-friendly computer interface
o Quick method set up
o On the fly parameter changes
o Convenient column, rack and solvent management
o Post-run evaluation (peak tracking)
o Report customisation
- Fraction Collector C-660: allows collection according to time, volume or peak, collection of up to 12 litres in a maximum of 240 glass tubes, teach-in function for customised racks.
- Set of 4 racks FC30 for 4x30 tubes 50 ml 26 mm diameter
- 20 glass tubes 50 ml for FC30
- Waste Diverter Valve allowing to divert flow to waste during tube change or between peaks.
- UV-Vis detetctor C-640, 4 wavelengths
- Chromatography Table for the integration of 2 pump modules, a detector and a fraction collector.
- Single Injection Unit: six way valve for sample loading, for connection of Sample Loop, Sample Chamber or Prep Elut Column.
- Sample Loop 20 ml
- Set of silica Sepacore Flash cartridges (12, 25 and 40 g)

This system does not include the computer.

Quantity:

tambahkan ke keranjang

11058260

Sepacore Flash System X50

System for fully automated binary gradient flash chromatography at a pressure up to 50 bar / 725 psi. Includes:

- 2 x C-605 Pump Modules: flow rate up to 250 ml/min at max. 50 bar (725 psi)
- Control Unit C-620 in SepacoreControl Package: allows complete system control and data handling
o User-friendly computer interface
o Quick method set up
o On the fly parameter changes
o Convenient column, rack and solvent management
o Post-run evaluation (peak tracking)
o Report customisation
- Fraction Collector C-660: allows collection according to time, volume or peak, collection of up to 12 litres in a maximum of 240 glass tubes, teach-in function for customised racks.
- Set of 4 racks FC30 for 4x30 tubes 50 ml 26 mm diameter
- 20 glass tubes 50 ml for FC30
- Waste Diverter Valve allowing to divert flow to waste during tube change or between peaks.
- UV-Vis detetctor C-640, 4 wavelengths
- Chromatography Table for the integration of 2 pump modules, a detector and a fraction collector.
- Single Injection Unit: six way valve for sample loading, for connection of Sample Loop, Sample Chamber or Prep Elut Column.
- Sample Loop 20 ml
- Set of silica Sepacore Flash cartridges (12, 25 and 40g)

This system does not include the computer.

Quantity:

tambahkan ke keranjang

1-2 of 2

	BÜCHI Labortechnik AG Meierseggstrasse 40 Postfach CH-9230 Flawil 1 Switzerland
www.buchi.com buchi@buchi.com	Tel: +41 71 394 63 63 Fax: +41 71 394 64 64	© 2008 BÜCHI Labortechnik AG

terakhir diubah: October 28 2011

Buchi Indonesia
Worldwide

Kontak BUCHI

Apakah anda ingin:

Tempat untuk membeli

Informasi Produk

Komunitas BUCHI *

* pendaftaran gratis diperlukan

Tetap up to date

Berlangganan newsletter

Akun Anda

Lupa kata sandi Anda?Bukan anggota? Gabung sekarang.Mengapa mendaftarkan ID Buchi?